1. When using the pruning shears for the first time, use the supplied charger to charge the lithium battery (supplied with the shears) (220 volts AC), and unplug the power plug after charging.
2. Put the lithium battery in the battery belt bag, and insert the power cord into the lithium battery and fruit tree cutting socket correctly, and tighten it.
3． Wrap the battery around the waist and adjust the carrying position.
4． Turn on the battery power switch and leave the scissors on standby.
5. Trigger the scissors twice in succession, and the scissors head will open to start the operation.
6. When stopping the operation, hold the trigger for 5 seconds to make the scissors closed, then turn off the power switch and unplug the power.
7. Cutting edge mode switch: The cutting edge of WSP-1 electric pruning shears is adjustable.
Method: When the cutting edge is opened to the maximum opening position, the switch trigger is held for 5 seconds, and the cutting edge is closed; release the switch trigger, and then Move the trigger switch twice to switch the knife edge to the small opening position; the operation method is the same, and you can switch the opening position freely repeatedly.
Contact Person: Ms. Maple Liang